MicrosoftWindowsWindows 11
Windows is programmed toassign drive letters automaticallywhen a new partition is created.
Since the first partition to be created is the system drive, it is usually labeled C by default.
For a partition to show up inWindows Explorer, it must have a drive letter assigned to it.
Otherwise, you cannot pull up the partition.
This is also true in case you attach a USB flash drive to your setup.
Table of Contents
On This Page
Is it Possible to Change System Drive Letter?
Let us now show you 5 ways to change drive letters in Windows.
If you do, clickYesagain, and thenrestartyour computer for the changes to fully take effect.
You will now see that the drive letter has been successfully changed.
Here is how:
Open Command Prompt with administrative privileges.
Now snag the volume for which you wish to change the drive letter by running the following cmdlet.
Now use the following command to assign a new, vacant drive letter to this volume.
Replace [Alphabet]] with the new drive letter that you want to assign.
The new drive letter will now be assigned.
You may now exit the Command Prompt since the partition will now automatically open in Windows Explorer.
Here is how:
Launch Windows PowerShell with administrative rights.
The drive letter will now change, and the partition will now automatically open in Windows Explorer.
Therefore, we insist that you create asystem restore pointor a completesystem image backupbefore proceeding forward with the process.
In the right-hand pane, look for the values whose name starts with \DosDevices.
This will display the current drive letters for the partitions on your machine.
Right-punch the drive letter you want to change, and then clickRenamefrom the context menu.
When the computer reboots, you will see the drive letter has been changed.
Moreover, it is portable software, which means it does not need to be installed on your PC.
Extract the contents of the compressed folder.
fire off the tool labeled dChanger.
The system will now automatically detect existing partitions and drive letters.
The drive letter will now change in an instant.
This can be a bit confusing, so we have drafted down the process in the methods below.
You may then see another warning message.
Now right-hit the primary partition again, and click Change Drive Letter and Paths from the context menu.
Here is how:
Enter the disk partition mode by typing in the following, and then hittingEnter.
Now remove the assigned drive letter using the following cmdlet.
Replace [Alphabet] with the drive letter currently assigned to this volume.
Now select thesecondaryvolume using the cmdlet below.
Now assign the recently-vacated drive letter from the primary partition to this volume using the given cmdlet.
Replace [Alphabet] with the drive letter initially assigned to the primary volume.
Now snag the primary partition again.
Now assign the drive letter from the secondary partition to this volume.
The drive letters have been swapped successfully.
you’re free to now exit the Command Prompt.
you could apply similar logic to other methods to swap drive letters between 2 or more drives.
This can be done using Windows PowerShell, Windows Registry, and the Drive Letter Changer software.
If the problem is not fixed automatically after a reboot, you may have to fix it manually.
Here are a few solutions that might work.
This is not an ideal case, but it will probably solve the problem.
Now repeat steps 2 through 5 until all paths have been updated with the new drive letter.
After the computer reboots, check to see if the issue has been resolved.
Simply delete the app, download the new setup from the vendors website, and perform a new install.
Closing Words
People often mistake the drive letter for the name of the volume.
However, these 2 are totally different.
By default, Windows names a new volume as New Volume.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
