Many users could not upgrade their operating systems simply because their hardware was not meeting the new standards.
The most significant requirements for Windows 11 are the Trusted Platform Module (TPM) 2.0 and Secure Boot.
Microsoft made these requirements mandatory as they enhance the systems security at the hardware level.
We have already talked about the different ways ofchecking TPM availability and versionon a Windows computer.
After having performed the procedures below, you should be able to install/upgrade to Windows 11.
While most modern computers come equipped with it, the older ones may still lack it.
TPM version 2.0 acts as an added security protocol for the protection of your system.
The function of a TPM chip does not just begin and end at boot and shutdown.
What is Secure Boot
Every computer or electronic equipment that runs an operating system also requires firmware.
A firmware is a piece of code that is executed even before loading the operating system.
Secure Boot has been standardized by the OEMs to help them tackle the increasing threats ofmalware.
bang out in msinfo23 and pressEnterto open theSystem Summarywindow.
Here, check for the information in front of Secure Boot State.
As you could see in the image above, Secure Boot is both available and enabled.
The computer will now start and then boot into Windows Recovery Environment (WinRE).
Then click Advanced options.Click Advanced options
Click UEFI Firmware configs.Enter UEFI firmware configs
Now clickRestart.
The computer will now reboot again.
Now go to the Secure Boot parameters.
Note:Your Secure Boot parameters might be under a different section, such asSecurityorBootsettings.
Enable Secure Boot by checking the option.
You might have slightly different parameters, like a radio button or a drop-down menu to enable it.
jot down in tpm.msc and pressEnterto launch the TPM Management console.
Here, look for TPMs status in theStatussection.
It also means that TPM could be available, but is disabled.
Either way, you must now go to the system BIOS to check and enable TPM 2.0.
If it is, you could also enable it.
Navigate to the following:
Click Restart now in front of Advanced startup.
ClickTroubleshoot.Click Advanced options
Click UEFI Firmware controls.
Now clickRestart.Restart computer
Now go to eitherAdvanced,Security, orBootsettings.
Every OEM can have a different category heading for TPM configs.
However, if the issue is something else, try theseTPM troubleshooting methods.
You must then either upgrade your hardware orinstall Windows 11 while bypassing its TPM and Secure Boot requirements.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
