In other words, it extends your private web connection onto the public internet.
If you are not familiar with the concept of VPNs, then this article is just what you need.
Using the same concept, you’re free to make yourWindows 11computer into a VPN server.
Learn how toset up a VPN connectioninstead.
Although Windows natively supports VPN connections, it is used to connect to a remote VPN server.
This protocol automatically allots vacant IP addresses to all connected devices to avoid any IP conflict.
For that, we need the IP address of this machine to be static, i.e.
Therefore, we must set a static IP address for this right now.
We will be assigning the same IP address manually to make it static.
We suggest that you do not exit the Command Prompt as some information will be needed from this window.
You have now successfully set up a static IP address on your box.
verify that you are still connected to the internet to ensure that all configurations are done correctly.
it’s possible for you to alsoset a static IP address and DNS server using the command line.
Usually, this IP is static.
But often ISPs tend to provide dynamic public IP addresses which change from time to time.
Note that this only requires to be done if your public IP address keeps changing.
The name you set for the domain will keep still while the public IP address keeps changing.
This will be required when further configuring the VPN server.
Note:Not all routers have this option.
hey check whether the setting is supported on your router via the manufacturers website.
Enter the IP address of the routers interface into aweb browsers Omnibox.
This IP address is usually found on the back of the router unless explicitly changed.
Log into the console.
The credentials are usually available on the back of the router, if not changed by a net admin.
Look for DDNS configuration.
This setting is usually underNetwork system, but each router can have its own different layout.
Configure the DDNS tweaks according to your requirements and set a name for the domain.
Remember the domain name as it will be required when you are connecting to this VPN server remotely.
Applyand save the changes.
You must forward the port for Point to Point Tunneling Protocol (PPTP) toPort number 1723.
Look for Port forwarding or Port mapping tweaks within the router.
These are usually found underForward Rules.
Now make the following configurations:
Once these configurations are done,save/applythe changes and restart the router.
Up until now, all of the steps were prerequisites to allow the VPN server to be accessible.
Select Specify IP address and then provide the IP address range for the incoming connections.
Then, clickOk.Set incoming connections IP address range
Click Allow access.
When configured, clickClose.
The VPN server will now be created.
As you will notice, a new (virtual) data pipe adapter will appear in theNetwork Connectionsapplet.
However, our work is not one yet.
Connecting to the Windows VPN Server
The VPN server is now set for the connection.
Now, you might connect to it using the built-in VPN client on a Windows computer.
Learn how toestablish a VPN connection on a Windows 11 computer.
Any data being transferred to and from the VPN server will now be secure over the public internet.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
