MicrosoftWindowsWindows 10
RAM is a vital component in determining the performance of a computer.
However, it is only valuable if it can be utilized.
Its not desirable to have a 32 GB memory module installed just to utilize part of it.
Therefore, you must compare the actual installed RAM and the usable memory on your PC.
The numbers will be in bytes.
Hence, you should probably confirm what capacity of the installed RAM is usable by the operating system.
This information is displayed on the About page.
launch the About page in the options app and look for the value ahead of Installed RAM.
This value is the usable RAM your OS has.
This will be discussed further down the post.
Once the memory sectors are mapped, they are no longer available to the OS.
Other factors include the OS not supporting the amount of memory installed on the computer.
Multiple other factors can also cause your setup to be able to use less memory than it has.
This has been addressed in the section below.
It also explains how the devices memory is split up to be distributed for various uses.
Open up the Resource Monitor by searching for it in the Search Box.
under Physical Memory you should be able to see how the RAM is distributed.
This will let you know what portion is being used and what porting is being reserved by other hardware.
Unfortunately, the process requires a fresh installation of OS.
you’re able to refer to our page todownload and install Windows 10 64-bit.
Therefore, ensure that all modules are seated and accessible by computer.
To verify this, run thewmic memorychip get capacitycommand in Command Prompt.
We suggest that you have a look at your motherboards user manual and rearrange your modules accordingly.
Disable maximum memory upon boot
Maximum memory consumption is often configured when the computer is starting up.
This enables the computer to perform its startup tasks more quickly and efficiently.
To disable this option, open theSystem Configurationwindow by typing inmsconfigin Run.
Then switch to theBoottab and clickAdvanced options.
On theAdvancedwindow, uncheck the box next toMaximum memoryand clickOk.
This setting, amongst other prefs, can be reconfigured through the BIOS.
Hence, it is important that you update it to the latest available version to get the best experience.
Any incorrect configurations can damage your BIOS and prevent you from running your rig at all.
In some cases, the Pagefile reserves some space in the system memory to perform the necessary tasks.
Before we proceed further, we suggest that youcreate a system restore pointas the process involves manipulating system registries.
Now, double-clickClearPageFileAtShutdownin the right pane and set itsValue Datato1.
Once done, kickstart your rig for the changes to take effect.
Windows 10 comes with a built-in tool for the task, however, it does involve a system reboot.
To invoke a memory test, key in inmdsched.exein Run and hit Enter.
In the pop-up window, clickRestart now and check for problems.
your system will now reboot and then automatically go into scanning mode.
It will then scan your memory to look for any bad sectors.
it’s possible for you to view the results in System Tray once the computer restarts.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
