Only when you know what the error means can you attempt to fix the issue.
Once such error prompt is CRITICAL_PROCESS_DIED.
Sometimes, the BSoD would run once and restart the system normally again.
In other instances, the BSoD enters a loop and the user can no longer boot into Windows.
Even if you are encountering the former situation, the system becomes unreliable.
It mostly has to do with corrupted system files or critical Windows services unable to perform as they should.
Troubleshoot from WinRE
Perform the following solutions in the given chronological order, and the problem should be fixed in no time.
This includes USB flash drivers, external hard drives, joysticks/controllers, projectors, etc.
Only leave the keyboard and the mouse plugged in.
View Advanced options in Startup Repair
To run Startup Repair, you must boot into the Windows Recovery Environment (WinRE.)
Press theWindows Key + ito bring up the options app.
Go toRecovery.Open Recovery configs
Click Restart now in from of Advanced startup.
Fix boots sectors from Command Prompt in Windows Recovery Environment
After a second or so, press the power button briefly to turn it back on again.
When the manufacturer logo appears again, hold down the power button again to turn it off.
Repeat these steps for another 2 times.
Run Hardware and Devices troubleshooter from the Run Command box
The third time, the computer will boot into the Windows Recovery Environment.
just complete the scan while ensuring that it doesnt lose power and follow any on-screen instructions.
Once the scan is complete, Windows will attempt to boot normally again.
Open Advanced Hardware and Devices troubleshooter settings
Select Command Prompt.Open Command Prompt from WinRE
The Command Prompt will now be open.
you might now perform the repair directly from WinRE using the commands given in the next section below.
These are all native Windows tools that scan, detect, and replace corrupted system files with redundant ones.
Set troubleshooter to apply repairs automatically
jot down in cmd and pressCTRL + Shift + Enterto run anelevated Command Prompt.
Now execute the following commands one after the other.
Note that each of these can take a few moments to complete.
Uninstall driver
Once the computer restarts, the Check Disk utility will run and scan your hard drive.
This can take a while, in some cases, hours.
Let the scan finish and reboot into Windows.
Remove the driver and uninstall the device
This machine code is then responsible for loading the firmware, and in turn, the operating system.
Issues with the boot sectors can often lead to blue screens.
Note that these commands cannot be executed from the Command Prompt after you have booted into Windows.
Update driver
If it does, then launch the Bootsect /nt60 sys command.
The Bootsect command fixes the boot sector issues in Windows.
While Bootrec can do this too, it can also repair theMBRand rebuild the boot manager (BCD).
Search for drivers automatically
After performing these steps, try restarting the computer normally again and see if the issue has been mitigated.
If it persists, perform the remaining fixes below.
Run Hardware and Devices troubleshooter
Note:The Hardware and Devices troubleshooter will soon be retired.
Open the device properties
If so, skip this step.
However, the Hardware and devices troubleshooter is no longer available there.
Instead, you better run it with a command.
Roll Back Driver
Give the tool sufficient time to trigger the scan thoroughly.
If an issue is detected, apply the suggested fix and then restart the computer.
If no problem is detected, then you may exit the tool and continue to the next fix.
Justify rollback
Moreover, drivers can also be updated through Windows Updates, so you must consider that as well.
To fix such an issue, you must try reinstalling a problematic driver.
Reinstalling it often fixes the issue as it is not correctly installed the first time.
Open the Installed Apps Settings page
However, if reinstalling it does not work, try updating it, or rolling it back.
key in in devmgmt.msc and pressEnterto kick off the gear Manager.
Now check to see if you still encounter the BSoD.
Uninstall problematic app from Settings
If you do, then update the driver.
bring up the gadget Manager again (Run command box > devmgmt.msc).
Right-pick the problematic rig and click Update driver.Update driver
Click Search automatically for drivers.
Uninstall problematic app from Programs and Features
Once updated,Closethe wizard.
If the driver was updated successfully, check whether the Critical Process Died BSoD is still occurring.
If it is, then try the remaining fixes below.
Open Windows Security
However, if no update is available, then try rolling back to a previous driver version.
Right-opt for problematic gear and clickProperties.fire up the gear properties
Switch to theDrivertab.
To rule out this case, you must uninstall the app and check whether it resolves the problem.
Open Virus and Threat Protection
you’re free to uninstall an app from both the Windows prefs and the Programs and Featuresapplet.
When asked for confirmation, clickUninstallagain.
Note:depending on the app, you may or may not see an uninstallation wizard at this point.
Open Scan options
If you do, go through the on-screen instructions to uninstall the app.
bang out in appwiz.cpl and pressEnterto fire up the Programs and Features applet.
Right-choose the problematic app and then clickUninstall.
Perform a full scan
The app will now remove itself from your PC.
You may or may not see an uninstallation wizard after performing the steps above, depending on the app.
If you do, follow the on-screen instructions to uninstall it.
Open Windows Update history
Certain types of malware affect critical system files, resulting in crashes and BSoDs.
Here are the steps to use Windows Security to perform a deep system scan:
Click Privacy & security.
After any malware has been quarantined, check to see if the BSoD has been rectified.
Uninstall Windows update from Settings
Go to Update history.Open Windows Update history
Click Uninstall updates.
Restart the computer to finalize the Windows update removal.
There areother methods to uninstall Windows updatesas well.
Confirm Windows update removal
you’ve got the option to alsoroll backto a previous build version.
After removing the problematic update, check whether the Critical Process Died BSoD error has been resolved.
Resetting the OS will restore all critical system files, services, and processes to their default operations.
Open the Task Manager from the taskbar
Click Reset PC.Reset PC
The reset PC wizard will now open.
This step can take a while depending upon your internet connection, and your PC may restart.
When a fresh OS has been installed, your BSoD issues should also be resolved.
Open the Details tab in Task Manager
Going forward, try avoiding performing the same actions that incurred the BSoD in the first place.
This concludes all the methods to fix the Critical Process Died blue screen on a Windows PC.
However, the Critical Process Died error is kind of vague, and does not give away much.
End the svchost.exe process tree
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
Shut down the computer
Critical Process Died BSoD
source: www.itechtics.com
