You dont have to worry.
This is a common problem for Windows users due to several reasons.
Depending upon where it is visible, we will apply the solutions accordingly.
However, some solutions need to be performed on either throw in of disk.
punch the respective link below and youll be taken to a guideline on how to perform that particular process.
If it is an internal hard disk, open up your PC/laptop and re-seat the hard drive properly.
Before you do that, verify the equipment is powered off and the power cable is unplugged.
If it is an external hard drive, disconnect it from both ends and then plug it in again.
Now find out if your PC can detect the hard drive.
It may be possible that the USB port is damaged or faulty.
So try plugging it into a different USB port and see if it shows up on your PC.
To enable it, run with this:
input your system BIOS.
In the BIOS parameters, kick off the configuration parameters and look for Drives or Hard Drives.
This can be enabled through BIOS/UEFI controls.
Here, ensure that the external USB ports are checked and enabled.
If it is disabled, enable it and then exit the BIOS while saving the changes.
This feature occasionally turns off the USB port even when an external hard drive is connected.
Once done, clickApplyandOk.
Now verify if your PC shows your external drive as connected.
The boot order decides which unit takes priority in running the operating system.
This can be changed by rearranging the boot order from the BIOS options.
input your system BIOS
fire up the Boot order configurations.
One such troubleshooter is the Hardware and Devices troubleshooter.
However, Microsoft recently disabled its GUI for users to access.
you might still run it using the Command Prompt.
Here is how:
Open Command Prompt with elevated privileges.
Now initiate the following cmdlet to launch the Hardware and Devices troubleshooter.
The troubleshooter will now run.
Perform those actions by clickingApply this fix, or any other suggested action.
Initializing a disk means prepping it for use with Windows.
In the bottom section of the console, you will see a disk stating Not Initialized.
Right-tap on it and then clickInitialize Diskfrom the context menu.Initialize disk
TheInitialize Diskwizard will now open.
snag the disk you want to initialize, and then select its partition style.
When done, clickOk.
Learn how tocheck partition styleorconvert MBR to GPT.Select partition style
The disk will now be initialized.
Formatting a hard drive removes all data from it to make space for new data.
ClickNexton the first screen.
On the next page, you will be asked to confirm the size of the partition.
Learn thedifference between NTFS, FAT32, and exFAT.Choose formatting style
Now clickFinishto begin the formatting of the drive.
Partition/volume can be a portion of the entire disk or the entire usable disk space on the drive.
However, it often works against that, and a previously worked volume suddenly disappears from Windows Explorer.
This happens when a letter is unassociated with volume.
Another instance where you may need tochange the letterfor a partition is when it conflicts with another.
In this case, you might simply change the letter for the second partition.
If you are assigning a new letter, clickAdd.
If you change the letter, you will be asked for confirmation.
ClickYes.Confirm action
The letter will now be assigned/changed.
Now check to see if you’re able to see the hard drive/partition in File Explorer.
If your disk driver is at fault, it wont communicate with the hard drive.
From the context menu, clickUpdate driver.
When it does,Closethe wizard.
It is also possible that it states The best drivers for your machine are already installed.
In this case, you’re able to attempt toinstall the driver manually.
If a newer driver is not available, then we suggest that youreinstall your current disk driver.
If it fails to repair any discovered bad sectors, it informs the operating system not to use them.
You will be asked to schedule the CHKDSK utility the next time the computer reboots.
EnterYfor yes.Check the disk next time the computer restarts
Now cycle your box.
Once it reboots, the Check Disk utility will run and scan your hard drive.
This can take a while, in some cases, hours.
Let the scan finish and reboot into Windows.
Use the built-in Windows Security Antivirus (formerly Windows Defender) to scan your machine for malware.
you’re able to also perform a scan using a third-party antivirus.
Here is a list of thetop antivirus software to useto perform the scan.
If you are proceeding to purchase antivirus software, here are the17 aspects you should always consider.
At this point, we would suggest that you always keep an eye on your hard drives health.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
