Lets go through the reasons behind this issue notification and its possible solutions.
Table of Contents
Why does the System thread exception not handled BSoD occur?
In this case, a system thread had generated an error which the handler was unable to catch.
There can be a number of reasons for the System thread exception not handled BSoD.
For example, if the file is associated with a video driver, you must update that driver.
If it is associated with the operating system, then your OS most likely needs to be repaired.
However, what to do when you are unable to even boot up your PC because of the BSoD?
This article discusses how you might fix the System thread exception not handled BSoD in every scenario.
Once off, turn it back on again.
Repeat the process 3 times and Windows will automatically boot into Windows Recovery (WinRe).
From there, navigate to the following:
The rig will now restart again.
Press the one that says Enable Safe Mode with Networking.
If you are in Safe Mode, you might try performing the rest of the troubleshooting techniques given below.
you’re free to find such information on the internet by searching for the said file.
Once determined, you must now update or reinstall the driver at fault.
To update a malfunctioning driver, open theDevice Managerby typing indevmgmt.mscin Run.
Now, look for the gadget with a faulty driver and then right-click it.
From the context menu, clickUpdate Driver.
In the pop-up window, clickSearch automatically for drivers.
The wizard will now search online for any updated drivers available.
Once installed, restart the computer.
Or you’re able to alsosearch for and install gadget drivers automatically.
You will then be asked if you want to remove the driver as well.
Check the box and clickUninstall.
Here is how you might rename the faulty file.
ReplaceFileNamewith the name of the file you noticed when the BSoD occurred.
This command will rename the file with an extension as old.
Now restart the computer and the OS will reinstall the driver automatically.
look to see if the System thread exception not handled BSoD remains.
What it does is replace any damaged or missing files.
Perform the following to launch the tool:
Once done, recheck if the issue persists.
Repair bad disk sectors
It is possible that the error occurred due to a faulty hard drive.
you’re free to verify if it has bad sectors by performing a test.
Now reboot your system and it will automatically perform a scan on your storage drive.
Note that the scan can take some time to complete, in some cases, hours.
Repair BCD files
BCD files are important for the system to run and boot up smoothly.
you might repair these by following the guide given below.
To do so,create a bootable USB driveand boot from it using the boot menu at startup.
From there, clickRepair your box.
Now, navigate to the following location to launch the Command Prompt.
Paste the following commands into Command Prompt one after the other to repair the BCD files.
Now bang out inexitto leave the Command Prompt and then reboot the computer.
Alternatively, you could also keep using theWindows DefenderAntivirus as well that comes built-in with Windows 10.
Often, the update includes a fresh copy of the files and can replace the corrupted ones.
Windows will now automatically download and install any outstanding updates.
c’mon ensure that they are installed successfully and then restart the computer.
Closing words
Encountering Blue Screens of Death on your OS is the last thing everyone wants.
For every BSoD, there is a solution.
0
Get weekly insights, tips and exclusive content delivered straight to your inbox.
Talk to us straight and get your questions answered right away
source: www.itechtics.com
