Solved: Machine check exception windows 10 Blue screen error

Getting frequent blue screen errorMachine Check Exceptionafter Windows 10 update.

The stop code MACHINE_CHECK_EXCEPTION bug check value 0x0000009C usually occurs because of faulty hardware or software incompatibility.

Of course, it could be the outdated drivers and corrupt or missing system files on your machine.

And to fix such blue screen errors on Windows 10, disconnect external devices and reboot your PC.

In addition, start your PC in safe mode and initiate the SFC utility command.

Updating your drivers will also eliminate the BSOD error on Windows 10.

Check Hardware problems

This error Machine Check Exception on Windows 10 is an underlying hardware issue.

Clean any dust from fans and heat sinks, ensure proper ventilation, and consider applying new thermal paste.

A faulty RAM /Memory module can also lead to Windows 10 blue screen error.

you’re able to useWindows Memory Diagnosticor third-party software like Memtest86 to test RAM for errors.

Sometimes Disk errors or bad sectors in hard disk lead to different blue screen errors on Windows 10.

Insert the bootable USB drive, Restart the computer and enter the BIOS/UEFI options.

The computer should now boot from the Windows 10 installation media, Select your language preferences and click Next.

press Repair your setup (usually located in the lower-left corner of the screen).

Select Troubleshoot and then press Advanced options.

Here select Startup Repair and go for the operating system to fix startup-related issues prevent starting Windows normally.

It can help you troubleshoot problems on your PC.

Outdated or incompatible drivers can often trigger the Machine Check Exception error.

Repeat this process for all devices, including the processor and graphics card.

Also, try installing the drivers in compatibility mode and verify if that helps.

Run theDISMRestoreHealth command and system file checker utility that scan and restores missing files with the correct one.

Restart Windows after completing the scanning process, and check there is no more BSOD at startup.

In that case, Your PC may become overheated.

Then, Any user may face this BSOD.

Sometimes, You may find that fans are very slow or stuck.

In that case, You will need to clean them or replace them with a new one.

After doing it, You should not face machine_check_exception again.

Also, Check SATA Cable And Power Cable Are attached properly to Hard Disk Drive.